Schumacher PID-500-USB Manuel du propriétaire télécharger pdf (Page 16)

• 16 •

PROBLEM REASON SOLUTION

Display shows . 12-

volt voltage is too high.

Display shows .De-

vice demands more than

the inverter’s continuous

power rating.

Display shows .

Inverter is too hot.

If in a vehicle, repair/

replace the alternator or

charging system. Use

a properly sized and

rated 12-volt battery. If

the input voltage returns

to 15-volts or less, the

inverter will automati-

cally restart.

Cycle the inverter power

OFF and ON. If problem

persists, use a larger

inverter or a smaller

device.

Increase the ventilation

to the inverter. Move

the inverter to a cooler

area. Reduce the power

consumption of the

device. The inverter will

automatically reset after

cooling.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 47 48

Pas de commentaire

Schumacher PID-500-USB Manuel du propriétaire Page 16